IG Data Creation Wiki

I Introduction and Running the Program for First Time

1 Introduction

2 Installation of IG.Model.Processor v1.4.0.100

• 2.1 Windows x64
• 2.2 Linux Ubuntu 24.04

3 How to Run IG.Model.Processor

• 3.1 Main Options
• 3.2 Example Command

* 4 Recommendations for First-Time Users

• 4.1 Extrusion Sample Command and File List
• 4.2 Flat / FlatPanel Sample Command and File List
• 4.3 Solid Sample Command and File List
• 4.4 Revolution Sample Command and File List

* II Model Configuration and Parameters

• 5 Setting Up Paths for Model.Processor
  • 5.1 Introduction Paths
  • 5.2 Understanding SVG Form
    • 5.2.1 SVG Commands Supported by Model.Processor
    • 5.2.2 Curve Commands
    • 5.2.3 Arc Command
  • 5.3 JSON Path Commands in IG.Model.Processor (in millimeters)
  • 5.4 Parsing Paths into Custom JSON Format
  • 5.5 JSON Examples for Each Path Command
  • 5.6 Requirements for Paths
  • 5.7 Small Full Example of JSON Path with Commands
  • 5.8 Referencing Path Definitions via the ''profile'' Parameter

• * 6 Model Type: Solid 1.4
  • 6.1 Setting Profiles for Solid 6.1.1 Figure: Incorrectly Set Profile 6.1.2 Figure: Correctly Set Profile 7 Model Type: FlatPanel 1.4
  • 7.1 General Knowledge of How a 5-Piece Furniture Door (Model Type: FlatPanel) Is Constructed 7.1.1 Components 7.1.2 Joint Types 7.1.3 Profiles * 7.2 Positioning and Dimensions of Frame Components
    • * 7.2.1 Example Board Placement Table 7.2.2 Graphical Representation of Board Positions 7.2.3 Example: JSON Configuration for Board Positions * 7.3 Intersection Parameter (“intersection”): JSON Configuration for Joint Types
    • * 7.3.1 Overview 7.3.2 JSON Syntax for Intersection 7.3.3 Example in Usage 7.3.4 Supported Intersection Types 7.3.5 Details 7.3.6 Usage Notes 7.3.7 Visual Examples 7.3.8 Butt Joints “HORIZONTAL” and “VERTICAL” 7.3.9 Solid and Miter Joints “SOLID” and “TRIANGLE” * 7.4 Explanation of "innerPanel"{} Object Configuration
    • * 7.4.1 Parameters for "innerPanel" 7.4.2 Visual Examples for innerPanel Models 8 Model Type: Extrusion 1.1

• * 9 Model Type: Revolution 1.0

• * 10 UV Coordinates
  • 10.1 Configuring UV Mapping Parameters with JSON * 10.2 UV Mapping (“uvOrigin”)
  • 10.3 UV Tile Scale (“patchSize”) * 10.4 Offsetting Texture (“uOffset”) and (“vOffset”)
  • 10.5 UV Mapping Method (“uvType”) * 10.6 UV Rotation (“rotation”)

• * 11 Mesh Quality
  • 11.1 Parameter (“quality”) * 11.2 Quality Parameter Visual Examples

• * 12 Shading
  • 12.1 Parameters (“shading.mode”, “shading.angle”) 13 JSON Parameters Summary and Full JSON Example