IG Data Creation Wiki

I Introduction and Running the Program for First Time

1 Introduction

2 Installation of IG.Model.Processor v1.4.0.100

• 2.1 Windows x64
• 2.2 Linux Ubuntu 24.04

3 How to Run IG.Model.Processor

• 3.1 Main Options
• 3.2 Example Command

4 Recommendations for First-Time Users

• 4.1 Extrusion Sample Command and File List
• 4.2 Flat / FlatPanel Sample Command and File List
• 4.3 Solid Sample Command and File List
• 4.4 Revolution Sample Command and File List

* II Model Configuration and Parameters

• 5 Setting Up Paths for Model.Processor
  • 5.1 Introduction Paths
  • 5.2 Understanding SVG Form
    • 5.2.1 SVG Commands Supported by Model.Processor
    • 5.2.2 Curve Commands
    • 5.2.3 Arc Command
  • 5.3 JSON Path Commands in IG.Model.Processor (in millimeters)
  • 5.4 Parsing Paths into Custom JSON Format
  • 5.5 JSON Examples for Each Path Command
  • 5.6 Requirements for Paths
  • 5.7 Small Full Example of JSON Path with Commands
  • 5.8 Referencing Path Definitions via the ''profile'' Parameter

* 6 Model Type: Solid 1.4

• 6.1 Setting Profiles for Solid
  • 6.1.1 Figure: Incorrectly Set Profile
  • 6.1.2 Figure: Correctly Set Profile

* 7 Model Type: FlatPanel 1.4

• 7.1 General Knowledge of How a 5-Piece Furniture Door (Model Type: FlatPanel) Is Constructed
  • 7.1.1 Components
  • 7.1.2 Joint Types
  • 7.1.3 Profiles
• 7.2 Positioning and Dimensions of Frame Components
  • 7.2.1 Example Board Placement Table
  • 7.2.2 Graphical Representation of Board Positions
  • 7.2.3 Example: JSON Configuration for Board Positions
• 7.3 Intersection Parameter (“intersection”): JSON Configuration for Joint Types
  • 7.3.1 Overview
  • 7.3.2 JSON Syntax for Intersection
  • 7.3.3 Example in Usage
  • 7.3.4 Supported Intersection Types
  • 7.3.5 Details
  • 7.3.6 Usage Notes
  • 7.3.7 Visual Examples
  • 7.3.8 Butt Joints “HORIZONTAL” and “VERTICAL”
  • 7.3.9 Solid and Miter Joints “SOLID” and “TRIANGLE”
• 7.4 Explanation of "innerPanel"{} Object Configuration
  • 7.4.1 Parameters for "innerPanel"
  • 7.4.2 Visual Examples for innerPanel Models

• * 8 Model Type: Extrusion 1.1

• * 9 Model Type: Revolution 1.0

• * 10 UV Coordinates
  • 10.1 Configuring UV Mapping Parameters with JSON * 10.2 UV Mapping (“uvOrigin”)
  • 10.3 UV Tile Scale (“patchSize”) * 10.4 Offsetting Texture (“uOffset”) and (“vOffset”)
  • 10.5 UV Mapping Method (“uvType”) * 10.6 UV Rotation (“rotation”)

• * 11 Mesh Quality
  • 11.1 Parameter (“quality”) * 11.2 Quality Parameter Visual Examples

• * 12 Shading
  • 12.1 Parameters (“shading.mode”, “shading.angle”) 13 JSON Parameters Summary and Full JSON Example