Differences

This shows you the differences between two versions of the page.

--- ig.creator:products:graphical:planner [2021/07/01 15:56] – [1) Catalog] ig_jsc
+++ ig.creator:products:graphical:planner [2024/04/04 08:04] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
 ====== Products/Graphical/Planner ======
-This page provides a complete 3D system consisting of a Catalog, a Basket, a Configurator and an interactive 3D planning window. Using these modules you can create multiple products and troubleshoot attachment points and inter-product rules.
+This page provides a complete 3D system consisting of a Catalog, a Basket, a Configurator, and an interactive 3D planning window. Using these modules you can create multiple products and troubleshoot attachment points and inter-product rules.
@@ Line 7: / Line 7: @@
 ===== 1) Catalog =====
-On the left side there is the Catalog. The data inside this catalog come from the commercial data like XcR or SimpleCom. \\
+On the left side, there is the Catalog. The data inside this catalog come from commercial data like XcR or SimpleCom. \\
 The corresponding catalog options need to be set up inside the [[ig.creator:settings|Settings]].
-In this view one or more catalogs can be shown on the same layer or nested in sub folders. The last layer of each catalog holds the articles that can be choosen.
+In this view, one or more catalogs can be shown on the same layer or nested in subfolders. The last layer of each catalog holds the articles that can be chosen.
-An article can be choosen by clicking one of the lines and is tranfered onto the right side to the basket (see section 2).
+An article can be chosen by clicking one of the lines and is transferred onto the right side to the basket (see section 2).
-On top of this table there is also the option to store selected articles inside a //Catalog Setup//. This setup can be called to recreate a former selected set of articles.
+On top of this table, there is also the option to store selected articles inside a //Catalog Setup//. This setup can be called to recreate a former selected set of articles.
 {{ :ig.creator:products:graphical:plannercatalogsetup.png?400 |}}
-On the bottom of this table there are two buttons available. //
+At the bottom of this table, there are two buttons available.
-They will export the current 3D View as igxc.json or oc.json.
+They will export the current 3D View as igxc.json or oc.json. \\
-:!: Keep in mind, this will only export a json file no assets :!:
+:!: Keep in mind, this will only export a json file no assets! :!:
 ===== 2) Basket =====
-The Basket holds the selected articles from the catalog. The basket is devided into two sections. On the top there is the basket itself on the buttom there are the configuration options for each article (see section 3).
+The Basket holds the selected articles from the catalog. The basket is divided into two sections. On the top there is the basket itself on the bottom there are the configuration options for each article (see section 3).
-Inside the basket an article can be selected for configuration, update inside the 3D View, highlighting inside the 3D View or deleting from the 3D View.
+Inside the basket, an article can be selected for configuration, update inside the 3D View, highlighting inside the 3D View, or deleting from the 3D View.
-To delete an article from the basket, select it press the right mouse button and select delete.
+To delete an article from the basket, select it, press the right mouse button, and select delete.
 ===== 3) Configuration Options: =====
 If an article from the Basket is selected, it can be configured here. The behavior is the same as inside the [[ig.creator:products:graphical:configurator#2) Configuration:|Products/Graphical/Configurator]].
-The //Update// button applyes the current configuration to the 3D View. The //Auto Update// option applyes the configuration automatically after each selection. The configuration profiles hold the options to select or create a predefined configuration.
+The //Update// button applies the current configuration to the 3D View. The //Auto Update// option applies the configuration automatically after each selection.
+The configuration profiles hold the options to select or create a predefined configuration. \\
+:!: For the configuration profiles take care, they are applied to all products in the basket :!:
 ===== 4) 3D View =====
-Inside the 3D View all articles from the basket can be shown. The behavior of the 3D View is similar to the [[ig.creator:products:graphical:configurator#1) 3D View:|Products/Graphical/Configurator]].
+Inside the 3D View, all articles from the basket can be shown. The behavior of the 3D View is similar to the [[ig.creator:products:graphical:configurator#1) 3D View:|Products/Graphical/Configurator]].
 The differences to the 3D View from the Products/Graphical/Configurator page are:
@@ Line 46: / Line 47: @@
 In case the bounding box is green the snapping rules are taken into account.
 E.G.:
-  * snapping two articles at there attachment points
+  * snapping two articles at their attachment points
-  * no snapping in case articles overlapp
+  * no snapping in case articles overlap
   * using snapping offset in case article positions don't fit 100% for snapping
@@ Line 59: / Line 60: @@
-For the article snapping the menu is extended by an other property called //Handling//.
+For the article snapping the menu is extended by another property called //Handling//.
-In this there are three properties that can be choosen:
+In this there are three properties that can be chosen:
-  * **Collisions (Moving):** If true, collision between two articles is detected and marked red.  In this case an article an not be placed at the same position a an other.
+  * **Collisions (Moving):** If true, a collision between two articles is detected and marked red.  In this case, an article cannot be placed in the same position as another.
   * **Collisions (Snapping):** If true, snapps two articles as long as their bounding boxes do not collide.
-  * **Interactors [Strg]:** If true, moving an articles inside the 3D View is resticted. If an article part has an interactor, this part is not used for detecting the mouse event for dragging. In case an article uses an //animation.json// all geoemtries are turned off for dragging. Only the attachment points can be used than.
+  * **Interactors [Strg]:** If true, moving articles inside the 3D View are restricted. If an article part has an interactor, this part is not used for detecting the mouse event for dragging. In case an article uses an //animation.json// all geometries are turned off for dragging. Only the attachment points can be used.
 ===== Issues and Solutions =====
 I: When I want to create/update the 3D object, I get this error in the Converter Console: //ERROR: Cannot access product ...//
-S1: Please check if the Scope the Converter is working on, matches to the Scope of the Product you want to insert. Sometimes, the user forgets to export the Project DB after connecting to another Project Database in the [[ig.creator:login|Login screen]]. Try to export the Project DB and then call Update again.
+S1: Please check if the Scope the Converter is working on, matches the Scope of the Product you want to insert. Sometimes, the user forgets to export the Project DB after connecting to another Project Database in the [[ig.creator:login|Login screen]]. Try to export the Project DB and then call Update again.
 S2: You're working in the correct Scope but before you have been in the page [[ig.creator:products:graphical:configurator|Products/Graphical/Configurator]] where you created an exclusive export of the Project DB, but for another Product. Try to export the Project DB and then call Update again.
-I: There is a message in the Log window saying: //Cannot open the SimpleCom file ! Please export the Commercial Data as SimpleCom file.//
+I: There is a message in the Log window saying: //Cannot open the SimpleCom file! Please export the Commercial Data as SimpleCom file.//
 S: In case the Planner page runs the SimpleCom configurator (to be chosen in [[ig.creator:settings|Settings]]) which needs a SimpleCom file. You can create it in this page but pushing the button SimpleCom. You can also export this file in [[ig.creator:assets:commercial|Assets/Commercial]].