Differences

This shows you the differences between two versions of the page.

--- ig:gfx:model-type-flatpanel [2025/10/29 14:57] – [Example: JSON Configuration for Board Positions] ig_ii
+++ ig:gfx:model-type-flatpanel [2025/10/29 15:59] (current) – ig_ii
@@ Line 1: / Line 1: @@
 ====== Model Type: FlatPanel 1.4 ======
+{{:ig:gfx:modelprocessor:flatpanel_graphic_latex.png?nolink&600|}}
 === General Knowledge of How a 5-Piece Furniture Door (Model Type: FlatPanel) Is Constructed ===
@@ Line 267: / Line 268: @@
 **Illustration:**
-  []
-  []
+^ **Figure 14: Panel Centered to FRAME** ^ **Figure 15: Panel Centered to CAVITY** ^
+| {{:ig:gfx:modelprocessor:panel_center.png?nolink&400 |}} | {{:ig:gfx:modelprocessor:panel_cavity.png?nolink&400 |}} |
+^ Caption ^ Caption ^
+| Panel centered to **FRAME** — aligned with the outer edges of the frame. The red cross shows the frame center. | Panel centered to **CAVITY** — aligned with the inner empty space of the frame. The green cross shows the cavity center. Particularly useful if the frame boards have different widths. |
 **Note:** This parameter determines the **initial positioning** of the panel. Subsequent adjustments using **''offset''** will move or resize the panel relative to this centered position.
@@ Line 290: / Line 295: @@
 ==== Visual Examples for innerPanel Models ====
-[]
+^ **Figure 16: EMPTY** ^ **Figure 17: SOLID1_1** ^ **Figure 18: SOLID1_3** ^
-[]
+| {{:ig:gfx:modelprocessor:innerpanel_empty.jpg?nolink&300|}} | {{:ig:gfx:modelprocessor:innerpanel_solid1_1.jpg?nolink&300|}} | {{:ig:gfx:modelprocessor:flatpanel_with_solid1_3.png?nolink&300|}} |
-[]
+^ Caption: Visual representation of the ''EMPTY'', ''SOLID1_1'', and ''SOLID1_3'' models for the ''innerPanel'' parameter. |||
 *Figure: Visual representation of the ''EMPTY'', ''SOLID1_1'', and ''SOLID1_3'' models for the ''innerPanel'' parameter.*
-{{newpage}}
+{{:ig:gfx:modelprocessor:flatpanel_solid1_3_blender.png?nolink&400|}}
+*Figure 2: flatPanel with SOLID1_3
+==== Explanation of Subframes ====
+The subframe structure is used to attach one or more secondary frames to a primary model. Each subframe is composed of individual pieces that are generated based on a specified model type, intersection logic, and profile path.
+^ **Figure 25: Subframe Illustration** ^
+| {{:ig:gfx:modelprocessor:subframe_graphic.png?nolink&600|}} |
+^ Caption ^
+| FlatPanel frame with generated subframe in red. |
+**Type:** ''array of objects'' \\ **Required:** No \\
+Defines one or more subframes attached to the main model. Each subframe entry references a specific model type, intersection mode, profile path, and an identifier. Typically, four subframe pieces are defined per subframe.
+  * **model**
+    : **Type:** ''string'' // **Enum:** `FLATPANEL1_0` // **Default:** `FLATPANEL1_0` \\
+    Specifies the model type used for the subframe.
+  * **intersection**
+    : **Type:** ''string'' // **Enum:** `TRIANGLE`, `SOLID` // **Default:** `TRIANGLE` \\
+    Defines how the subframe boards are intersecting each with one another.
+  * **profile**
+    : **Type:** ''string'' \\
+    References a path ID defined in the global `paths` array used to generate the subframe profile.
+  * **id**
+    : **Type:** ''string'' \\
+    Unique identifier for the subframe. This value is used to reference and name generated subframe elements.
+  * **offset**
+    : **Type:** ''object'' // **Required:** No \\
+    Defines an optional translation offset of the subframe in millimeters.
+    ^ Offset Parameters ^ Description ^
+    | **x** | horizontal offset (width) in mm. |
+    | **y** | vertical offset (height) in mm. |
+    | **z** | depth position offset in mm. |
+  * **pieces**
+    : **Type:** ''array of 4 objects'' // **Required:** Yes \\
+    Contains exactly four subframe pieces (see illustration above), each defined by a unique ID. Optional UV parameters overwrites may be provided for individual pieces.
+    * **id**
+      : **Type:** ''string'' \\
+      Unique global identifier for the subframe piece (also used as the output mesh name).
+    * **uv**
+      : **Type:** ''object'' // **Required:** No \\
+      Optional UV mapping settings for the piece.
+      ^ UV Parameters ^ Description ^
+      | **rotation** | Rotation of UV map in degrees. |
+      | **patchSize** | Size of UV patch in millimeters. |
+      | **uvorigin** | **Enum:** `ORIGIN`, `CENTER`. Defines UV anchor point. Default: `ORIGIN`. |
+      | **uOffset** | UV translation offsets for U-axis in millimeters. |
+      | **vOffset** | UV translation offsets for V-axis in millimeters. |
+----